Regulatory Approvals
Triosyn® T50, U.S. EPA Registration No. 72897-1
Triosyn® T50 is an iodinated resin that is intended for
formulating end-use microbiological water purification
systems to treat water for drinking water purposes. This
product is also intended for reformulating or
repackaging into end use products intended for use as an
iodinator, water disinfectant or for use in
recirculating cooling water systems.
Triosyn® T50 Powder, U.S. EPA Registration No. 72897-2
When incorporated into the manufacturing process,
Triosyn® T50 powder provides built-in antimicrobial
activity in a variety of materials and finished
products. Triosyn® T50 Powder is registered for use as
an additive during the manufacturing process for the
following materials/applications: paints, stains, and
other coating systems, including enamel urethanes, wood
stains, and alkyd epoxy enamels, for use on exterior
surfaces; synthetic and non-woven textile materials for
use in aquarium filters, vacuum bags and filters, air
filters/materials, door and floor mats, and outdoor
equipment such as awnings, tarpaulins, and portable
outdoor shelters.
Triosyn T50-I™ Filter, U.S. EPA Registration No. 72897-3
The Triosyn T50-I™ Filter aids in the control of
bacteria and slime in open recirculating cooling water
systems associated with industrial processes. The T50-I™
Filter is not affected by pH values, dissolved mineral
levels, or temperatures commonly found in open
recirculating cooling water systems that cool industrial
processes. The control of bacteria and slime is achieved
by periodically passing fluids from the recirculating
cooling water system through the Triosyn T50-I™ Filter,
which contains an iodinated resin. The iodinated resin
effectively controls the growth of microorganisms in the
fluid.
Triosyn T2 Disinfectant Spray, U.S. EPA Registration No.
72897-4
T2 Disinfectant Spray is registered by EPA to
disinfectant hard, nonporous surfaces in institutional,
industrial, commercial, animal care, and hospital, and
medical care environments. With a two minute contact
time, T2 Spray rapidly disinfects against bacteria,
viruses, and fungi, including Salmonella choleraesuis,
Staphylococcus aureus, Pseudomonas aeruginosa,
Rhinovirus 37, Herpes Simplex 1, Influenza A, and
Trichophyton mentagrophytes.
Triosyn T-3000™ Respirator, U.S. NIOSH TC-84A-4109
In the United States, the National Institute for
Occupational Safety and Health (NIOSH) certifies
respiratory protective devices and establishes testing
requirements for particulate filters. The T-3000T is a
small sized flatfold filtering facepiece respirator that
includes a Triosyn layer for built-in antimicrobial
product protection and a carbon layer for relief from
nuisance organic vapors. NIOSH has approved the Triosyn
T-3000™ Respirator for protection at a P95 particulate
efficiency level.
Triosyn T-5000™ Respirator, U.S. NIOSH TC-84A-4110
In the United States, the National Institute for Occupational Safety
and Health (NIOSH) certifies respiratory protective
devices and establishes testing requirements for
particulate filters. The T-5000™ is a cup-style
respirator that includes a Triosyn layer for built-in
antimicrobial product protection and a carbon layer for
relief from nuisance organic vapors. NIOSH has approved
the Triosyn T-5000™ Respirator for protection at a P95
particulate efficiency level.
Triosyn T-5000V™ Respsirator, U.S. NIOSH TC-84A-4234
In the United States, the National Institute for Occupational Safety
and Health (NIOSH) certifies respiratory protective
devices and establishes testing requirements for
particulate filters. The T-5000V™ is a cup-style
respirator with an exhalation valve that includes a
Triosyn layer for built-in antimicrobial product
protection and a carbon layer for relief from nuisance
organic vapors. NIOSH has approved the Triosyn T-5000V™
Respirator for protection at a P95 particulate
efficiency level.
Triosyn T-3199-S Respirator, U.S. NIOSH TC-84A-4327
In the United States, the National Institute for
Occupational Safety and Health (NIOSH) certifies
respiratory protective devices and establishes testing
requirements for particulate filters. The T-3199-S is a
small sized flatfold filtering facepiece respirator that
includes a Triosyn layer for built-in antimicrobial
product protection and a carbon layer for relief from
nuisance organic vapors. NIOSH has approved the Triosyn
T-3199-S Respirator for protection at a N99 particulate
efficiency level.
Triosyn T-3000 and T-3000 SV Respirators, European CE Marking
Certificate No. 1503 (Directive 89/686/EEC)
In Europe, the Triosyn T-3000 and T-3000 SV Respirators
have received a CE product marking certification under
the regime of Council Directive 89/686/EEC. Tested in
accordance with harmonized standard EN-149:2001 and 120
mg Exposure test, these respirators are CE certified to
offer FFP2 protection level against solid and liquid
particles. Within the European Union and the European
Economic Area, the CE marking demonstrates compliance
with the Personal Protective Equipment Directive and
indicates that the manufacturer has satisfied all
assessment procedures specified by law for its product.
Triosyn Research Inc., Canadian Medical Device Establishment License No.
1748
In Canada, the Triosyn Respirators are regulated as
Class I medical devices. The Health Products and Food
Branch of Health Canada has issued a medical device
establishment license, which authorizes the importation
and sale of the Triosyn Respirators in Canada, to
Triosyn Research Inc., a Triosyn Corp. Company located
in Quebec.
Triosyn Corp., Canadian Medical Device Establishment License No. 2277
More recently, Triosyn Corp. has acquired its own Canadian
Medical Device Establishment License, which allows the
company to distribute directly the Triosyn respirators
as class I medical devices in Canada.
|
|
